Monosem

The Precision Planter Specialist Slide Down
Our innovation, Your success

Falcon

Slide Down

Baldan

Quality, Reliability, Peace of Mind Slide Down

4-row Monosem planter

3-disc plough

The BALDAN AF Monted Disc Plough was designed to work in various types of land, providing high plowing quality and performance, which can also be used for the construction of contour lines. The BALDAN AF Mounted Disc Plough has multiple disc adjustments, such as height, swivel and inclination, ensuring the best adjustment for each soil type.

Trailed Mounted Disc Harrow

The BALDAN SP Drag Type Offset Leveling Disc Harrow is absolute sales leader in its category because it has a special design; it can at once break lumps, level the terrain, incorporate herbicides and others, leaving the area in ideal conditions for planting; it has sections of smooth and grooved discs to ensure high work performance, excellent daily yield, with two versions: drag or connected to the 3rd point in terrains difficult to maneuver.

Seedrill

Seed Drill BM provides seed planting on prepared soil. Widely used for seeding of cereal seeds (wheat, rye, barley, oats, etc.), legumes (peas, beans, lentils, etc.) crops, as well as seeds of other crops close to the size of seeds and seed rate to crops, along with fertilizer.

Mechanical Planter-HMMF

Mechanical planter has 2, 4, 5 and 6, iseed unit, sowing foot, disc coulter and disc. It is produced with fertilizer hopper iand without fertilizer hopper. Seed imachine is operated by means of imechanical system. Mechanical planter is ioperated with hydraulic lifting lever and iuniversal three point linkage system. iMachine can be transported easily to the field. Mechanical planter can be used for precise seeding. Different type of seeds like corn, sun flower, cotton, sugar beet, soybean, peanut, and chickpea can be sowed on single row with this machine on every kind of cultivated soil. The most important specialty of the seed drill is not only the simplicity of the design but also the facility of the usage.

Agromaster Boom Sprayer

  • Automatic filling system with filter that fills into the spraying tank by pumping water from the canal or any source with the suction hose.
  • Connected to the three-point linkage of tractor and powered by P.T.O.
  • Weighs from 145 to 210Kg depending on tank capacity.
  • Sprayer booms are produced in lengths of 8 and 12m.
  • Tanks are produced from polyethylene or fiberglass.
  • Requires 40hp to 70hp from pto shaft.
  • Tank size range from 600 to 1000L.
  • Nozzle Type:  Conical or Tee Jet.

Agromaster Single Disc

  • Mountable to a tractors universal three-point linkage system and hydraulic top link.
  • Horse power required ranges from 35Hp to 60Hp depending on hopper size.
  • Easily adjustable fertiliser spreading rate by means of mechanical lever.
  • Spreading shut off is done by means of mechanical or hydraulic ventils.
  • Vertical type gearbox with 1 to 1 ratio or 1.25:1.
  • -540rpm PTO operating speed.
  • From 250L to 600L capacity.
  • Working width of 14m.

Agromaster Double Disc

  • Mountable to a tractors universal three-point linkage system and hydraulic top link.
  • Horse power required ranges from 35Hp to 60Hp depending on hopper size.
  • Easily adjustable fertiliser spreading rate by means of mechanical lever.
  • Spreading shut off is done by means of mechanical or hydraulic ventils.
  • Vertical type gearbox with 1 to 1 ratio or 1.25:1.
  • -540rpm PTO operating speed.
  • From 250L to 600L capacity.
  • Working width of 14m.

Mounted Disc Plough

  • The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing.
  • It is used to open the new fields and to process the stony areas.
  • It can be used easily at rocky and rooted areas.
  • It is specially useful in hard and dry trashy land conditions and in soils where scouring is a major problem.
  • It is being produced with 2-3-4 and 5 bottoms with an option for extra kit for furrow addition.
  • It is directly mounted to the tractor
  • Extra heavy-duty pipe frame has high trash clearance allowing the plough to operate despite heavy crop residue

Jumbo Fixed Mould Board Plough

  •  It is protected with shear bolt for safety.
  •  It’s heavy duty tubular structure and strong frame design help to resist load during deep ploughing.
  •  It has adjustable depth wheel to control depth & load of plough.
  •  It’s High quality boron steel tyne provides high strength to load protection.
  •  It has heavy duty sheet metal three point linkage and with heavy duty draw bar.

Mounted Mould Board Plough

  • The under-frame and unit-to-unit clearance are adequate to cope with trashy conditions.
  • Adding an extra furrow or repositioning units to allow for extra clearance is quick and easy.
  • The plough has special wear-resistant steel blade with bar points for toughest ploughing jobs.
  • Bar points having longer life, as they can be extended till the last possible length.
  • It is designed to work in all types of soil, for soil breaking, soil raising and soil turning.

High Speed Disc Harrow Pro

  • Used in open field workings for the superficial ploughing, for the shattering of clods, preparation of soil for sowing, burial of organic substances & remains
  • To air the soil and to eliminate the weeds.
  • For breaking the roots.
  • It can be used in light and medium soil.
  • Quick hitch compatible.
  • Tillage depth of the harrow is 4″~6″

Heavy Duty Hydraulic Harrow

  • Used in open field workings for the superficial ploughing, shattering of clods, preparation of soil for sowing, burial of organic substances & remains.
  • It can be easily transported on the tyres using the hydraulic system.
  • High quality boron steel disc with 48~52 HRC hardness.
  • Effectively break up heavy clods because of sturdy design and weight.
  • Bearing spools for better lubrication and less load on tractor.
  • High quality seals are used to prevent the bearing & hub from mud & water entry.

Mounted Offset Disc Harrow

  • Used in open field workings for the superficial ploughing, shattering of clods, preparation of soil for sowing, burial of organic substances & remains.
  • It can be easily transported on the tyres using the hydraulic system.
  • High quality boron steel disc with 48~52 HRC hardness.
  • Effectively break up heavy clods because of sturdy design and weight.
  • Bearing spools for better lubrication and less load on tractor.
  • High quality seals are used to prevent the bearing & hub from mud & water entry.

Tandem Disc Harrow Light Series

  • Used in open field working for the superficial ploughing, shattering of clods, preparation of soil for sowing, burial of organic substances & remains.
  • To aerate the soil and to eliminate the weeds.
  • For breaking the roots.
  • It is designed to work for speed up to 20 km/h.
  • Effectively breaks up heavy clods because of sturdy design and weight.
  • High quality boron steel discs

Hunter Series Mounted Offset Disc

  • It has adjustable front & rear gang at different angle’s to set the disc to different field conditions.
  • It’s Heavy duty tubular structured & sturdy frame design helps effectively to break heavy clods.
  • It’s heavy duty sealed gang bearing Hub keep all the components lubricated and free of dust.
  • It’s adjustable scrapers keep the blades clear of material, allowing an excellent residue handling.
  • It has gang axle lock which help to prevent loosening of disc gang during field working.

Falcon Blower mower F50/150]

  • Weighs from 217Kg to 560Kg. light weight equipment that does not put stress on 3 point linkage system.
  • Offer a robust and cost-effective solution for maintaining a wide range of areas under grass..
  • Available in a range of sizes having working widths from 0,9 to 1,5 m.
  • With the optional capability to collect cut material
  • They are suitable for tractors from 14hp to 80hp.
  • With 4 blades attached to a single spindle.

Falcon Haymaker [F80/150 and F80/180EV]

  • Have min cutting height of 40mm and maximum cutting height of 155mm.
  • They are suitable for tractors from 60hp to 90hp
  • With 2 blades attached to a single spindle.
  • Have working widths of 1,5 or 1,8 m.
  • Weighs from 513Kg to 610Kg.
  • Requires 60hp to 90hp.

Falcon Slasher [F50/150 and F50/180]

  • It has adjustable front & rear gang at different angle’s to set the disc to different field conditions.
  • It’s Heavy duty tubular structured & sturdy frame design helps effectively to break heavy clods.
  • It’s heavy duty sealed gang bearing Hub keep all the components lubricated and free of dust.
  • It’s adjustable scrapers keep the blades clear of material, allowing an excellent residue handling.
  • It has gang axle lock which help to prevent loosening of disc gang during field working.

Kverneland Ecomat

Kverneland Ecomat is a lightweight implement that tills the soil extremely efficiently via shallow ploughing (10-18cm). New short bodies available in steel or plastic for low wearing.

Kverneland 2500 i-Plough

ISOBUS mounted reversible plough
The best crops need the best soil preparation. Ploughing is for the majority of farmers one of the most efficient methods to control weeds, create humus and prepare soil for seeding efficiently. Keeping an eye on the bottom line is equally important. The burial of residues must be perfect and easy to achieve while cost must be minimized: low fuel consumption, low wearing of parts, low lifting capacities, low pull requirements. Comfort in transport and in operations is a must in modern farming. The plough must be robust and lasts long as any profitable investments.

From transport to perfect furrows in a record time, from the tractor cabin:
Smart: define any relevant plough settings from the tractor cabin.
Unique: 10 innovations to improve the farmers/contractors working life.
Easy: the ISOBUS screen clearly shows how to adjust the plough within your fingertips.

KVERNELAND 150 B VARIOMAT

Perfect choice for light to medium soils without stones
Launched in 2009, this new mounted reversible plough aims at professional farmers with small to medium size farms. This new design generates high cost savings for the farmer. Light but robust plough : Kverneland Technology! 100×150 mm induction heat treated frame for 3 to 4 furrow and 150×150 mm for 3 to 5 furrow. New 150 serie head stock. Recommended for tractors up to 150 HP.

Kverneland ES – LS

Easily adaptable to different soils and tractors
The interbody clearance of 85cm or 100cm gives the possibility to plough regardless of weather or crop conditions. The front part construction makes it adaptable to any tractors.

Kverneland Qualidisc Pro

Compact disc harrow: from 2.0 to 7 meter

Stubble cultivation is of major importance within conservation tillage: It incorporates weeds and volunteer cereal seeds into the soil with an intensive mixing and promotes their germination for a more efficient subsequent treatment.
The even incorporation of the straw presents a key factor for seed germination. Therefore, Kverneland has designed the Qualidisc Pro to comply with these requirements, but also to offer the farmer a versatile machine which is ready for shallow as well as for deeper cultivation.

Kverneland Qualidisc Farmer

The Kverneland Qualidisc Farmer has been designed for operation up to 10cm working depth.Therefore, the Kverneland Farmer is 7% to 15% lighter than the current Qualidisc, thus easier to lift and ideal to reduce soil compaction.

The Qualidisc Farmer is available in working widths from 2 to 4m, the folding version and the Qualidisc Farmer trailed are available from 4 to 6m.

The Qualidisc Farmer is equipped with a new disc arm ready to receive the heat-treated disc of 520x5mm (hardness 215kg/mm²) without any lateral moving during work for a constant cutting quality.